Frontpage Forside  l  Sitemap  l  Søgning  l  Kontakt os  l  Jofrasales Login ADKnet  l  Danish English Germany China France 


    Forside » Kalibrering » Central to-zone kerne

 

              Print       

Central to-zone kerne

Reliable temperature source - most important

A good user interface and integrated solutions offer you timesavings and easy handling of even difficult calibration jobs. But the quality of your temperature calibration measurements still depends on the quality of the temperature source.

The temperature block must be very stable and at the same time have a good temperature homogeneity. This is very important because the sensors-under-test may have different measurement zones. As the sensor-under-test will also act as a thermal load in the block during the calibration, it is important that the block keeps the good homogeneity even with multiple numbers of probes and with large probes.

The new dual-zone design of the heating block is the most innovative step taken to solve the thermal problems mentioned above. AMETEK has developed two different versions of the dual-zone principle - the ACTIVE-CONTROL and the CENTRAL-CONTROL versions. Both versions eliminate the need for insulation of the sensors-under-test and make it possible to calibrate liquid filled and other mechanical sensors. 

Dry-block well - optimized for accuracy
Dual-zone heating block: Central-control

This type of heating block is constructed in two zones, with central-control of the zones. The main zone (lower zone) ensures optimum heat dissipation throughout the entire block.

The upper zone compensates for the heat loss from the top of the block and from the sensor-under-test, and is optimized to give a good homogeneity in the block. The central-control dual-zone heating blocks are used in the JOFRA temperature calibators ITC 320 A and ITC 650 A.
 





AMETEK Denmark A/S - Gydevang 32-34, 3450 Allerød, Danmark - Tlf: 4816 8000, Fax: 4816 8080 - E-mail: jofra@ametek.com